SOLVING TECH SOLUTIONS S.R.L.

CUBO is a wheel washer with a modern design, which performs a deep cleaning of the tire and rim to protect the worker and the environment in which it works. CUBO exploits the concept of high pressure cold water washing and high quality biodegradable detergents, also intervening in difficult parts, such as those in or near the valve. Functionality Greater productivity Working with cleaner wheels improves and speeds up the operator's work. Easier and more accurate maintenance operations Greater longevity than other equipment, such as tire changers High washing efficiency Greater safety and driving comfort Extension of the useful life of service machines Better working conditions for operators, cleaner workshops Best customer service Wheel washing is a profitable service and improves customer service. Better results in terms of tire performance Better wheel balance A healthier workplace and cleaner storage Dirt and dust on the tire and rim are retained by filtering the water

TWIN LIFT can lift wheels up to 80 kg at a maximum height of 1650 mm. It is powered by a rechargeable battery 24V dc. Equipped with a selector to raise/lower the trolley. Equipped with 4 pivoting wheels (two complete with brake) and one bolt compartment. The double upper handle makes it easy to move. Functionality The innovative system without front forks on the ground allows our wheel lifter to easily approach the lift, reaching the closest point to the wheel housing. Fast recharge. Standards / Approvals In accordance with the Machinery Directive 2006/42 / EC, Annex II, part 1, section A. CE mark Lifting speed at maximum load: 11 seconds 24V battery power supply -> maximum freedom of movement and operational independence + fast charging Internal sliding = optimal sliding, less friction and less noise Robust swivel wheels with brake -> maximum maneuverability Completely safe thanks to the inclination adjustment screw Equipped with small rubber wheels = no damage to the rims

The Wheelwasher Masterwash 4 is the new fully automatic wheel washer made by Solving Tech Solution. The washing of the wheels always takes place using the same procedure as the CUBO manual wheel washer, but with the help of the trolleys it allows the automatic loading and subsequent washing of the wheels in a continuous cycle, managed by a software programmable by the operator who controls the programs and cycles washing. Masterwash 4 is a cutting-edge wheel washer that saves the operator time and money during the washing phases, ensuring the operator a clean and healthy environment and maximum customer satisfaction. Features All the features of the manual version, but it works with 4 or 8 WHEELS in continuous sequence -> there is no need to keep it under control High pressure cleaner Wheeled trolleys (4 tires) Programmable touch screen panel Wheel drying system included Wi-Fi for remote control and command (full remote assistance for assistance)

ATF Super is the new fully automatic ATF machine. It completely works the gearbox with all its components and replaces the oil automatically. Thanks to an intuitive and easy-to-use new generation software, it is able to support the operator with fully automatic operations such as checking the oil replaced, and also a diagnosis of the system at the start and end of the work as well as adding additives after the fluid replacement. ATF Super has automatic flow recognition, so the operator does not have to worry about the direction of rotation of the oil during the oil change phase and does not have to manually reverse the hose connection. This avoids wasting time - risk of damaging the gearbox and unnecessarily leaching the floor or the operator himself. Thanks to an extensive list of metal connectors, ATF Super is able to guarantee thorough cleaning of the heat exchanger, removing all dirt (not all machines on the market are able to do this).

DPF-RENEW STS cleans the DPF of diesel engines, blocked by soot, ash and other types of contaminants, restoring their original functioning, without need to disassemble the DPF from the vehicle. Functionality It easily cleans and regenerates diesel engine particulate filters (FAP or DPF) without having to disassemble them from the engine It reduces maintenance costs related to manual regeneration of the clogged particulate filter. Reduced cleaning and regeneration times Operating conditions Relative humidity ............... 30% 95% Temperature ...................... -20°C +50°C Technical Data Power supply 12 Vdc from vehicle battery Pump 12 Vdc direct connection gears Maximum capacity 1 liter / min Standards / Approvals In accordance with the Machinery Directive 2006/42 / EC, Annex II, part 1, section A. Features Vehicle battery power supply (12VDC) Gear pump with direct connection 12Vdc

The ENGINE-R STS machine is an equipment which, powered by the 12Vdc of the vehicle battery, is able to effectively clean the power supply system (FUEL treatment) and the collector of intake (AIR INTAKE treatment) of the engines, Diesel and Petrol, without disassembling any their part, allowing them to effectively solve their typical problems, with considerable savings time and money. With the FUEL treatment the injectors, the intake valves (indirect injection) and are cleaned the combustion chamber from dirt and carbon deposits, feeding the motor vehicle with specific additives, instead petrol or diesel, without removing the injectors and without disassemble any part of the engine. The AIR INTAKE treatment is carried out by vaporising the vehicle air intake specific detergents, removing dirt and carbonaceous and oily deposits from the system of air intake, the treatment restores the correct operation of the engine.

tank for washing mechanical parts used with ecological detergents with enzymes / microbes, capable of breaking the chain of hydrocarbons that make up the dirt, destroying them (Bioremediation). This does not mean that it can also be used with normal ecological water-based detergents. In this case, the dirty washing liquid must be disposed of at the end of its life according to the local regulations in force. The tank is equipped with a temperature regulation able to bring the detergent liquid to a higher temperature than the ambient one, both to keep the enzymes / microbes more active, and to improve its detergent effect. It has a great design, is ergonomic and has a double wall construction for better thermal insulation.

The product, unique in design and type of operation, is capable of transforming the wastewater produced by Floorwashers, Partswashers, Wheelwashers, Pressure Washers,. into reusable water in the process and capable of respecting the environment and the law. BLUEWATER works like your home washing machine: load the dirty water, load the detergent (pre-measured powder contained in water-soluble bags), start the wash. That's all. Functionality Same water can be used and used again Lower costs for the disposal of deposited waste No chemicals used, only physical filtration Easy to install + Easy to use The polluting substances are automatically collected in bags and dehydrated, thus becoming easily disposable. Standards / Approvals In accordance with the Machinery Directive 2006/42 / EC, Annex II, part 1, section A.

PUREAIR is a portable ultra-fine nebulization disinfection system that guarantees complete disinfection and sterilization of surfaces and environments. The system is designed for the disinfection of small and medium spaces (classrooms, clinics, offices, changing rooms, hotel rooms, etc.) without any side effects for people and tools. High efficiency, safety and ease of use are the strengths of this machine. Used in combination with a specific disinfectant PUREAIR-D it is able to break down molds, fungi as well as the bacterial and viral load in civil and industrial environments. PUREAIR uses compressed air as a fluid to convey the disinfectant as a nebulized solution. The PUREAIR system uses a powerful but non-toxic disinfectant. Thanks to PUREAIR technology, the liquid is nebulized in drops with a diameter of less than 10 microns (5 times less than the diameter of a hair) which saturate the environment and disinfect it without wetting or damaging the surfaces.

The induction machines for heating magnetic materials have high power and exceptional operation. They create the heat directly inside the metal, reaching red heat (about 1000 degrees Celsius) in just a few seconds, avoiding any change in the metal characteristics. By generating heat only in the desired point, the most common operations of straightening, bending and pin or bearing replacement can be carried out. The absence of a naked flame, besides lowering costs by more than 50% compared with the use of tanks, allows work to be done even near cables, hoses or other heat-sensitive parts. Functionality induction heating systems are particularly suitable for: Brazing, shaping, hardening, before/after heating straightening, annealing Removal of: welded pins, suspensions, shock absorbers Straightening of: shafts, rods, leaf springs, rigid axles Loosening of ball joints, bolts, silencers, Lambda sensors, wheel arms, screws and rusty elements Work on the brake discs